Roller Shutter Slats
We have a range of roller shutter laths in steel and Aluminium. These slats make up the roller shutter curtain. The Galvanised steel laths are cold rolled to for the curved curly lath. The Steel Laths are manufactured using 18 Gauge,19 Gauge,20 gauge and 21 Gauge, The lower the gauge, the thicker the steel. Available in Solid, Perforated or Punched and Grill type.
Conventional Lath
- Available in size 3″, 3.5″
- Material available CR/GP/GA
- Thickness 18, 19, 20, 21, 22 Gauge
Hero Flat Lath
- Available in size 3″, 4″
- Material Available GI/CR
- Thickness 19 gauge, 21 gauge
AACE Flat lath
- Available size 3″
- Material Available GI/CR/GA
- Thickness 19 gauge, 21 gauge
conventional seethru
- Available size 3″
- Model Available Hero / AACE/Conventional
- Thickness 19 gauge /21 Gauge
Book Lath Section
- Available size 4” & 6”
- Material Available CR
- Thickness 19 Gauge/21 Gauge
C Section
- Material Available CR
- Thickness 21 Gauge
Grill Section
- Material Available GI
Guide Channel
We carry a large range of Roller Shutter Guide Rails. The size of the guide will depend on the shutter slat and the size of the roller shutter.
- Available size 2.5", 3", 4", 5"
- Material Available HR/CR/GI
- Thickness available 10G, 12G, 14 G
Bottom Plate
Bottom plate with flange
- Thickness available 10G, 12G, 14 G
- Material available HRPO/GI
Bottom Plate without Flange
- Thickness available 10G, 12G, 14G
- Material available HRPO/GI
Plain Bottom
- Thickness available 10G
- Material available HRPO0
Top covers
- Pull and Push top cover
- Gear/Motorised
- Power Coated
Gear Box
- Model available
- Cast iron Gear box
- Italian reduction Gear box made of aluminium
Wicket Gate
Size available
- 4'x2'
- 5'x2.5'
Tubular Motor
- Tubular Motor 300
- Tubular Motor 500
Chain Drive motor
- 600 1P
- 800 1P and 3P
- 10001P and 3P
- 20003P
U Clamp
Available in 3mm, 5mm thickness
Material available mild steel
Pipe
Available in size 1.25 inch, 1.5 inch, 2 inch, 3 inch, 4 inch, 5 inch, 6 inch,
8 inch
Lock Set
- Godrej Side lock
- Godrej centre lock
- Europa centre lock
- Book gate lock
Pulleys
The Pulley goes inside the top cover and used with manual shutter only.The Pulley is used for the movement of roller shutter up & down.
- Bearing Pulley
- Available size 1.5", 2"
- M.S Pulley
- 1.25"/1.5"
- RC Pulley
- 1.25"/1.5"
Clips
MS Clips
MS Hero Clips
Springs
- 2 Gauge Spring Available in 15" 18"
- 3 Gauge Spring Available in 10", 12", 15", 18"
- 4 Gauge Spring 10", 12", 15"
- 5 Gauge spring 10", 12"
- 1 Gauge spring 18", 24"
- 0 gauge 18, 24
- 00 gauge 24"
Bracket Plate
The Bracket plate is joined to the side of the Top cover using Rivets.The pin of the Bracket goes into the guide channel that give support to the head box..
Available in Size 13x13, 14x14, 16x16, 18x18, 20x20, 24x24
Thickness available 3mm, 5mm, 8mm, 10mm, 12mm
Click here for Products
Material available Mild Steel
